Quiksteel Plastic Tank Repair Kit

Technical Data

PART NUMBERS: 6522K

QUIKSTEEL PLASTIC TANK REPAIR KIT consists of everything needed to make a permanent repair to leaks in metal tanks or housings - from a small pin hole to a large hole or crack. THERE IS NO NEED TO EMPTY THE TANK.

QUIKSTEEL PLASTIC TANK REPAIR KIT contains the following parts:

56gm QUIKSTEEL PLASTIC REPAIR - see below for the information on QUIKSTEEL PLASTIC REPAIR
Sandpaper to prepare surface
Degreasing swab to clean surface
Fibreglass reinforcing screen for large holes
Fuel styptic pencil to temporary stop small fuel leak
Full instructions

FAST DRYING: QUIKSTEEL PLASTIC REPAIR firmly sets in 15 minutes, and is completely cured and ready to drill, sand, tap, prime, machine and paint in one hour (longer in colder conditions).

STRONG: There are two ways strength is measured. One is on the horizontal plan – this is called "shear strength" and the other is on the vertical plane and this is called "tensile strength."

SHEAR STRENGTH – When cured (one-hour drying time) QUIKSTEEL PLASTIC REPAIR has a shear strength of 740 pounds per square inch. This means that when two pieces of material are bonded together with a one-inch bond of QUIKSTEEL PLASTIC REPAIR, it would take a pressure greater than 740 pounds to break the bond. For comparison, pine timber has a ‘shear strength’ of 400 pounds per square inch. QUIKSTEEL PLASTIC REPAIR is almost twice as strong as pine timber.

TENSILE STRENGTH – QUIKSTEEL PLASTIC REPAIR has a tensile strength of 6,200 pounds per square inch.

HARD: QUIKSTEEL PLASTIC REPAIR is one of the hardest materials next to steel. Technically it is rated at D-87. "D" is the highest hardness rating in the Shore rating system.QUIKSTEEL PLASTIC REPAIR can be compared to ABS plastic (material used to manufacturer automobiles) or the fibre epoxy wings on the B2 bomber. When cured, QUIKSTEEL PLASTIC REPAIR can be machined in any way that steel or aluminium can be machined, drilled, tapped, milled, sanded, sawed, routed, primed, and painted. Anything you can do to metal or wood – you can do to QUIKSTEEL PLASTIC REPAIR.

SEALS LEAKS UNDER WATER OR IN FLUIDS: QUIKSTEEL PLASTIC REPAIR cures underwater and in all atmospheric conditions. Leaks can be sealed inside a container, tank, etc. with liquids still in the item to be sealed. Curing time is longer when used under water.

SEALS LEAKS WHILE LEAK IS OCCURING: If a petrol or diesel tank, oil pan, or any container has a rupture, QUIKSTEEL PLASTIC REPAIR will seal the leak while the drainage is occurring. No need to empty container prior to repair.

IMPERVIOUS TO CHEMICALS: QUIKSTEEL PLASTIC REPAIR is impervious to most chemicals including battery acids.

STEEL REINFORCED: QUIKSTEEL PLASTIC REPAIR has the maximum holding power because it is steel reinforced, and manufactured using the highest grades of epoxy.

WITHSTANDS TEMPERATURES OF 500 DEGREES FAHRENHEIT OR MORE: QUIKSTEEL PLASTIC REPAIR maintains its qualities when exposed to temperatures in excess of 500 degrees Fahrenheit. (+260oC)

LONG STORAGE LIFE: QUIKSTEEL PLASTIC REPAIR has a minimum storage life of three years. This provides the user long storage life. QUIKSTEEL'S PLASTIC REPAIR proprietary formula is the only brand that remains pliable before use. This insures easy mixing even after long periods of storage. DOES NOT CRACK OR FLAKE BEFORE USE.

IDEAL FOR REPAIR OF: Petrol and diesel fuel tanks, water tanks, swimming pool equipment, exhaust systems, boats, automobiles, trucks, plumbing, farm machinery, home, camping equipment, and hundreds of other applications.

QUIKSTEEL PLASTIC REPAIR has world - wide approval to use with potable water (ANSI/NSF 61). NSF certifies all QUIKSTEEL PLASTIC REPAIR brand epoxy putty products safe for the repair of drinking water pipes, holding tanks and dispensing components.

CarGo, QUIKSTEEL is the brand to recommend to your customers because it works!