Removable Threadlocker - Technical Data

Technical Data

PRODUCT: REMOVABLE THREADLOCKER/SEALANT

PART NO: 49461

DESCRIPTION

DynaGrip Removable Threadlocker a general purpose Removable Medium Strength product. It will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. DynaGrip Removable Threadlocker does not run off or drip and does not migrate after assembly. Once applied, parts slip together easily, lubricated by the adhesive.

APPLICATIONS

Replaces lock washers and plastic inserts. Locks machine tool access bolts, studs, and hydraulic system bolts. Used on gear box bolts/driveshaft, bearing cover cap screws, counter sunk screws, conveyor roller bolts and construction equipment.

USEFUL HINTS/NOTES

Using DynaGrip Removable Threadlocker threadlocker is easy, the product is color coded blue and once cured, it seals and vibration proofs the assembly, giving controlled breakloose and prevailing torques. Using conventional tools you can disassemble parts. When force is applied, the parts breakloose (first movement) but it will take several turns before the cured film will stop resisting the turning action, thus ensuring against accidental component disassembly.

PROPERTIES

Controlled torque tension. Easily removed with conventional tools. Thixotropic nature prevents run-off on application and migration after assemblies.

INSTRUCTIONS FOR USE

Ensure parts are clean, dry and free from oil and grease.

PROCEDURE FOR APPLICATION

Product is normally hand applied from the bottle.

COMPATIBLE ACCELERATORS/PRIMER

Ritelok Primer T, or Primer N can be used. However up to 30% strength loss can occur when using primers.

TECHNICAL FEATURES

Resin: . . . . . . . . . . . . . . . . . . . . . . Dimethacrylate
Color: . . . . . . . . . . . . . . . . . . . . . . Blue
Cure Speed with Activator: . . . . . . <5 minutes
Cure Speed without Activator: . . . 20 min @ 25ºC (77º F)
Viscosity (Thixotropic) . . . . . . . . . . 1200-5000cps
Gap Fill: . . . . . . . . . . . . . . . . . . . . . .0.127mm (005")
Flash Point: . . . . . . . . . . . . . . . . . . >100ºC (>212ºF)
Shelf Life: . . . . . . . . . . . .. . . . . . 12 months @ 20ºC (68ºF)
Specific Gravity: . . . . . . . . . . . . . . 1.1 to 1.15
Max. Operating Temperature: . . . . -18ºc to 204ºC ( -65ºF to + 400ºF)

CURED PERFORMANCE

Full Cure Time: . . . . . . . . . . . . . . . 12 hours @ 20ºC (68ºF)
Typical Breakaway Strength . . . . . . 1.15 – 2.30 Kg/M (100-200 lbs")
Typical Prevailing Strength . . . . . . .0.34 – 0.69 Kg/m (30-60 lbs")

STORAGE

Store in a cool area out of direct sunlight. Shelf Life > 12 month @ ambient temperature.

PRESENTATION

Bottles: . . . . . . . . . . . . 6ml

HEALTH & SAFETY IN USE

IRRITANT: Contains Methacrylate Esters and some products contain small amounts of Acrylic Acid. Irritates the eyes, the respiratory organs and the skin. In case of contact with the skin, wash immediately with plenty of water.

REVISED 11/14/97
TDSTL42

The information contained herein is produced in good faith and is believed to be reliable but is for guidance only.

AFC International Pty. Limited. and its agents cannot assume liability or responsibility for results obtained in the use of its product by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in our literature and furthermore the users responsibility to observe and adapt such precautions may be advisable for the protection of personnel property in the handling and use of any of our products.