MUFFLER & TAILPIPE SEALANT

Material Safety Data Sheet

AFC INTERNATIONAL PTY. LTD. Ph: 02 9627 7125 Fax: 02 9627 7126

SECTION I

Company Address: 21-23 Hobart Street, Riverstone, New South Wales 2765, Australia

Chemical name and synonyms: Hydrated Sodium & Magnesium Silicates
Chemical family: High temperature Bonding Cement, High temperature Bonding Cement
MUFFLER AND TAILPIPE SEALANT

Part Number: 49411

PERSONAL PROTECTION: SEE SECTION 8

SECTION II – HAZARDOUS INGREDIENTS

Pigments: None Solvents None
Catalyst: None Additives None
Vehicle: Water Others None

HAZARDOUS MIXTURES OF OTHER LIQUIDS, SOLIDS, OR GASES: NONE

SECTION III– PHYSICAL DATA

Boiling Point: 121°C (250°F)
Specific Gravity (H20=1): Greater Than 1.4
Percent Volatile by Volume (%): Approx. 40%
Evaporation Rate: N/A
Solubility in Water: Dispersible
Appearance and Odour: Grayish – No Perceptible Odour

SECTION IV – FIRE AND EXPLOSION HAZARD DATA

Flash Point: None
Flammable Limits: N/A

SECTION V – HEALTH HAZARD DATA

Threshold Limit Value: N/A
Effects of Overexposure: Irritation if Ingested, Eye Contact or Skin Contact.

EMERGENCY AND FIRST AID PROCEDURES:
If Splashed in Eyes, or on Skin: Flush Copiously with Water.
If Ingested: Do Not Induce Vomiting. Give large
Quantities of Water. Call a Physician.

SECTION VI – REACTIVITY DATA

Stability: Stable
Incompatibility (Materials to Avoid): None
Hazardous Decomposition Products: None
Hazardous Polymerization: Will Not Occur
Conditions to Avoid: None

SECTION VII – SPECIAL PROTECTION INFORMATION

Steps to be taken in case Material is Released or Spilled: Flush Away with Water
Waste Disposal Method: Dilute with Water.

SECTION VIII – SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify Type): None required unless atomized.
VENTILATION:
Mechanical (General): None Needed.
Local Exhaust: None Needed
Special: N/A
Other: N/A
Protective Gloves: Suggested
Eye Protection: Protective Goggles
Other Protective Equipment: None Required.

SECTION IX – SPECIAL PRECAUTIONS

Precautions to be taken in Handling and Storing: Keep From Freezing. Store at
Ambient Temperatures in
Tightly Closed Containers.

Other Precautions:
FOR MANUFACTURING USE: Keep Pumping System Airtight.
Keep Exit Nozzle under Water when not in Use. Flush System Thoroughly
With Water at Regular Intervals.
Suggested Pumping Pressure 60 P.S.I.
Or More. Product Wt. Approx. 12lbs
./Gal.

POISONS INFORMATION CENTRE
Adelaide: (08) 8204-6117 Brisbane: (07) 3253-8233
Canberra: (02) 6285-2852 Darwin: (08) 8922-8842
Hobart: (03) 6338-8485 Melbourne: (03) 9345-5678
Perth: (08) 9381-1177 Sydney: (02) 9692-6111
POLICE OR FIRE BRIGADE: 000 EXCHANGE: 1100

Information presented herein has been complied from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief but is not guaranteed to be so. Nothing herein is to be constructed as recommending any practice or any product in violation of any patent or in violation of any law or regulation. It is the user's responsibility to determine for himself the suitability if any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.

Rev. 01/09/2001

Click Here for Technical Data

< close window >